Summer long sundress pattern. How to sew a summer sundress - pattern and step-by-step photos


Instructions

Open two trapezoids 1 meter high. The length of the lower base is 90 cm, make the upper base of the trapezoids different. For the back panel of the sundress it should be equal to the width of the back plus 2 cm, and for the front panel it should be equal to half the circumference of the chest plus 6 cm. Don’t forget to add 1 cm on all sides of the patterns for the seams.

Sew the top of the back panel of the sundress with a long stitch and gather it along the width of the yoke. Fold both parts of the back of the yoke (part A) with the wrong side out, place the back panel of the sundress between them and sew, retreating to the width of the seam.

In the front panel, make a couple of large tucks on each side, stepping back from the middle of part B by 5 cm. Adjust their depth so that the width of the upper part of the front panel coincides with the width of the lower edge of the front yoke. Fold both parts of the front yoke (part B) with the wrong side out, place the front panel of the sundress between them and sew, retreating the width of the seam.

Iron the yoke and the sewn panels of the front and back parts of the sundress, stitch the seams along the front part of the yoke, retreating 0.1 cm.

Sew the side seams, starting from the top of the sundress, iron them and align them along the length. Hem the hem, retreating 2 cm. Fold part C in half, tuck the long edges inward and stitch the part along the long side on both sides.

Hand stitch the upper parts of the front and back yoke with a large stitch, tucking the edges of parts A and B inward. Mark the locations and adjust the length of the sundress straps. Place them between the back and front pieces of the yoke, lightly backing the hand-made seam. Secure them with a basting and then topstitch the top seam, leaving 0.1 cm from the edge.

It often happens that the jeans you bought don’t fit your figure or you just don’t like them anymore. Denim fabric is so versatile and always in fashion that you can sew any item from unwanted jeans that will look stylish in any setting. Sew a sundress from jeans that can be worn with any blouses or T-shirts.

You will need

  • - jeans;
  • - chintz fabric for finishing;
  • - beads, sewing machine;
  • - scissors;
  • - threads;
  • - needle;
  • - zipper or buttons.

Instructions

Take old jeans and cut them off top part so as to cut off the entire zipper and the top seam connecting the legs. Cut the front of the legs in the middle so that you have two large panels.

Connect the fabrics along the long sides and sew together. At the same time, make sure that the decorative seams of the jeans are in front. To make the sundress fit better, make the seam not straight, but fitted.

Attach the future sundress to the figure, mark the top lines and carefully cut out. Remember that the sundress does not have to cover the chest; it can be decorated as an apron. Fold all loose edges and stitch. To make the sundress look romantic, sew on bright chintz borders and a beautiful brooch made from leftover fabric and chintz.

If you have a slim body, make darts on the sides at the waistline. Also make the factory seams fitted.

Stitch the zipper to the back or carefully trim the edges and sew on the buttons. Process the bottom of the sundress. Add frills with folds from the same chintz, they will transform the sundress and give a romantic look to the look.

Cut one or two pockets from the remnants of jeans, trim the pockets with a chintz facing, add an original flower, embroider a figured stem and leaves on a sewing machine (with contrasting threads). Sew pockets to the sundress. If desired, even replant the welt front pockets along with the adjacent area of ​​fabric.

Make flowers from chintz and decorate your sundress with them. Sew decorative stitches on the stems and leaves using contrasting threads.

Make straps from the same chintz. Cut a wide strip of material, sew a long tube and turn it right side out. For decoration, thread a few beads on each side. At the back of the strap, connect a metal ring with a vertical denim strap into which you can thread an elastic band.

Tear off the jeans and sew belt loops onto the sundress at waist level or below.
You've got an excellent sundress made from jeans that you can wear both for a walk and for work.

Sources:

  • denim sundress

The sundress is one of the undisputed symbols of the summer wardrobe. In the 2013 season, sundresses are as light, bright and feminine as ever. In favor are catchy floral patterns, sunny yellow colors and a romantic maxi length. But first things first.



Sundresses 2013: fashionable color and print

The brighter the sundress, the better mood, - many eminent designers decided to adhere to a similar slogan. Fashion gurus encourage girls to wear sundresses in neon shades and with multi-colored prints. A riot of colors reigned on the 2013 catwalks, involuntarily setting the mood for vacations and dreamy promenades in city parks.

Among such rich shades, yellow especially stood out - sundresses in the color of the sun and delicate lemon sorbet are most often present in the summer 2013 collections. They can be found at Camilla and Marc, DKNY and Issa, Tommy Hilfiger, Juicy Couture, Matthew Zink, Alberta Ferretti and many others . The fashion houses are also echoed by the lines of mass market brands. Cute yellow sundresses can be seen at TopShop, Zara and GAP.

Sundresses this summer are full of catchy floral-themed prints. On them you can see garden roses and dahlias, scarlet poppies and field cornflowers, exotic lilies and orchids. This print adds brightness to the sundress and at the same time emphasizes the femininity of its owner. Similar models can be found at Juicy Couture, Issa, Etro, Christian Dior, Pink Tartan, Rochas.

Sundresses 2013: fashionable style

The undoubted hit of the summer of 2013 were long sundresses. Their length can vary from mid-calf to the floor. They feature a more relaxed silhouette and loose fit. Cross straps on the neck that expose the shoulders will add charm to the look. Similar models can be seen at Kira Plastinina, Paul&Joe and Tommy Hilfiger. Maxi-length sundresses also look quite impressive in a single-color design.

Of course, we couldn’t do without minis! Flirty and playful sundresses with exorbitant short skirt, like Dolce & Gabbana, Juicy Couture, Blumarine - a great way to stand out at a party.

What to wear with fashionable sundresses 2013

Sundresses in yellow color look best in the company of striped or blue sandals with rope wedges, white pumps or espadrilles with satin ribbons to match the outfit. A wide-brimmed straw hat and a spacious summer bag in pastel colors will be the perfect completion of a stylish summer ensemble.

Sundresses in floral print should not be overloaded with details. It is better to select accessories for them in a monochromatic neutral palette so that they do not distract attention from bright pattern sundress.

Floor-length models look especially colorful in the company of gladiator sandals, which have returned to high esteem. A long, plain sundress can be complemented with a light denim jacket and bright sandals on a flat platform.

Mini-length sundresses should be combined with high platform or wedge sandals, a miniature patent leather handbag, large jewelry - this model requires bright touches!

Sources:

  • sew fashionable sundresses
  • Sundresses summer 2013 Top most current models summer

A summer jumpsuit made of light flowing fabric looks good on both an adult slender woman and a little girl. Even a novice needlewoman can sew this fashionable and practical thing. Thin opaque or translucent fabric, sewing supplies, patience and accuracy - that's all you need for the job.

Choosing fabric

The light jumpsuit consists of oriental-style trousers combined with a top. For such an outfit, natural or artificial silk, chiffon, and thin knitwear are ideal. In principle, even chintz or satin will do. As for the amount of material, it depends on the width of the cut. If the width is greater than the circumference of the hips, one length of the product is sufficient. The style of the top may vary. The simplest option is two very wide straps. They cross front and back and are fastened to the belt. This jumpsuit can be worn without a blouse; the top looks like a top. Don't forget that in addition to fabric you will need:
- threads suitable in color and quality;
- wide elastic band;
- 4, 8 or 12 identical buttons.
Cotton fabrics must be washed or ironed through a damp cloth before cutting.

No pattern needed

You can cut out such a jumpsuit, be it for women or for children, quite quickly. Measure the circumference of the waist and hips, the length of the ischial seam, the overall length of the trousers and straps. Summer overalls can be paired with shorts, Bermuda shorts, capri pants or oriental Aladdin-type pants. There are also quite a few design options for the bottom - a skirt-trouser with a hemmed or hemmed edge, pants with an elastic band, etc. Measure the length of the strap. To do this, place the zero mark of the measuring tape at a point on the waist approximately 5 cm to the right of the navel. Place the tape measure diagonally over your left shoulder, then along your back, also diagonally, to a point on your lower back. The end point is exactly opposite the one at which the zero mark is located. The cutting is done directly on the fabric. Lay out the fabric, find the middle of the cut (you can mark it). Fold to the center edge line. Cut out 2 identical rectangles, the long side of which is equal to the length of the product, plus 3-4 cm for processing the top and bottom. The short side should be at least half the circumference of the hips. It is better to make the trousers wider, especially if the fabric drapes well. You measured the length of the straps, but their width can be any.
It is better to cut the straps a little longer than necessary.

Assembling the overalls

The lower part of the overalls consists of two symmetrical parts. Fold both rectangles in half, mark where the ischial seam will end. Baste and stitch the crotch seams. Then turn one pant leg right side out and the other right side out. Place the first one into the second one, baste the ischial seam. Turn the product inside out, sew the top edge with a “forward needle” seam and try on what you got. Adjust the product according to your figure. Sew a wide elastic band, laying the fabric in beautiful folds. Sew buttons onto the belt. Process the bottom edges of the trouser legs. They can simply be overlocked if they are shorts or Bermuda shorts. On long oriental trousers, it is better to make drawstrings by bending the bottom by 0.5 and 1 cm and inserting elastic bands. A style with wide elastic bands to match the belt will also look good.

Assembling the top

If you are sewing a jumpsuit from thin knitwear, you don’t need to sew the straps in half. Cut out rectangles of the required length and width, and process all cuts with an overlocker. Put on your pants, pin the straps to the waistband with tailor's pins, and mark the places for the loops. Make slotted loops and sew them with a buttonhole stitch. If the straps are very wide, they can easily be turned into a tank top by sewing them together with a few stitches under the arms.

It is very easy to sew a sundress for a woman expecting a baby. After all, there is no need to create darts or achieve a tight fit. The product will be spacious and to the expectant mother It will be convenient and comfortable.



You will need

  • - textile:
  • - pattern:
  • - scissors;
  • - sewing machine.

Instructions

A sundress is one of the most popular clothes for pregnant women. You can wear a knitted turtleneck underneath it and wear it in the cold season. Cut this item from warm soft fabric. If you sew a sundress for a pregnant woman from light cotton or knitted fabric, then the new thing will help the girl endure hot weather comfortably.



Once you have decided on the type of fabric, you need to calculate how many meters to buy. Take a centimeter and measure the distance from the intersection of the neck and shoulder to the desired length of the future product. Usually this is the bottom of the knee. Multiply the resulting value by 2 and add 12 cm to the result. This is how much fabric you will need to buy.

After that, start cutting it out. A sundress for a pregnant woman consists of a front yoke, a back yoke and two more parts - the back and the shelf. Take tracing paper, attach it to the pattern and redraw all the details onto this transparent paper.

Fold the fabric in half. All parts are symmetrical, so only their halves are shown on the pattern. This means that the central part of the paper pattern is the fold line. Attach it to the fold of the fabric. Arrange all 4 parts in the same way, aligning the central vertical line of the paper base with the fold on the fabric.

When you lay out the parts, leave some space between them. To hem the bottom, leave 3 cm (both on the back and on the shelf). For the side seams, add 1-1.5 cm. You can arrange all 4 parts in the following sequence: first - the front yoke, below it - the back yoke, below - the shelf, below it - the back. Trace the pieces onto the fabric using the paper backing, but cut them out taking into account the seam allowances.

In sundresses for pregnant women, the front is much wider than the back, so that the tummy is spacious and you can wear this thing even when it gets bigger. Gather the top of the front with a thread using a needle so that this part becomes equal in length to the lower part of the front yoke. Place these two pieces together and machine sew them together. The result is a complete front part.

Gather the back part too, but just a little and stitch it together with the back shelf in the same way. The result was 2 parts - a shelf and a back. Fold them right sides together and stitch on both sides to the wrong side.

Finish the armhole and neckline with bias tape cut from the remnants of the main or other fabric. You can buy this trim, cut diagonally, at a haberdashery store.

On your hands, use a hidden seam to hem the bottom of the product. Iron, steam seams and try on new outfit, in which you will be even more charming.

note

If you are unsure of how long you want to sew a sundress, then purchase fabric with a maximum length so that there is enough fabric. It's better to have a reserve.

Helpful advice

If you wish, you can sew square or welt patch pockets to the front of the product, stitching them from the inside to the side parts of the front and back.

Most We spend our lives at work. And a woman’s understandable desire is the need to look stylish, beautiful and well-groomed not only among friends, at a party, but also in the area where we communicate every day, conduct business negotiations, discuss gossip and, in the end, ensure financial stability, so necessary in modern life. Not always in shopping centers Among the endless variety of clothes, we find something suitable and appropriate for work. However, sew sundress For office Quite possibly at home.

You will need

  • - material for sewing
  • - tape measure
  • - scissors
  • - needles
  • - threads
  • - sewing machine

Instructions

Decide how long it will be sundress style of your choice. Please note that short sundress s-mini for office will be inappropriate. Ideal sundress For office one whose length reaches to the knees or slightly below. The color of the fabric is desirable in calm, consistent tones, no flashy or iridescent shades. Shiny materials with a lot of sequins are also best left for sewing festive outfits. Lightweight fabrics

Today's master class is dedicated to how to quickly sew summer sundress with assemblies.

Sewing this dress is so simple that even those who have just started sewing dresses can complete this task perfectly. E

This style of sundress is especially good because it will favorably emphasize the advantages of almost any type of figure, and such a dress is very comfortable to wear on a hot summer day.

You will need:

  • fabric (use the instructions in the first step to determine exactly how much material you will need);
  • elastic thread;
  • measuring tape;
  • ordinary sewing supplies.

Before you start sewing a sundress, you should wash the material. Wash the fabric the same way you intend to wash it. ready product, as this allows you to detect problems with the fabric, such as it fading or shrinking, before you sew your sundress.

How to sew a simple summer sundress - step-by-step instructions

1. The first step is simple math

The dress consists of two rectangles, the fabric used should not have complex patterns, so all you need is to determine only two measurements.


First, you need to measure your chest size. You should measure yourself with the tape at your most prominent points, but don't pull the tape too tight as you will still need to breathe.

Multiply your chest volume by one and a half and add a couple of centimeters for allowances. Divide the resulting result by two.


Thus, we received measure A - the width of our rectangle. Next we need to determine the length of the sundress.

Take a measuring tape and measure yourself, starting from your chest to where you want the hem of the dress to be, making sure to stand straight.


Add an allowance of about four centimeters on top and eight on the bottom for the hem. This is our measure B.

Cut out two rectangles measuring A by B.

2. Second step - side seams and hem

Fold the fabric for the top edge over twice, press, pin and stitch as close to the edge as possible. It's important to do this before you get to work on the gathers because once they're done, getting a straight edge will be nearly impossible.


Sew, turning the fabric right side to wrong side. Finish edges with overlock or zigzag stitches.

The same should be done with the bottom edge. But if you haven't decided on the length of your sundress, this stage can wait.

3. The third step is preparation for assembling the assemblies


For those of you unfamiliar with the shirring technique, it is simply sewing with elastic thread in the bobbin case instead of thread. This is a very convenient and easy sewing method as it adds shape to your clothes without the use of clasps or zippers.

It's important to remember that the fabric should be right side out when you gather the pleats, so the elastic will be on the inside of your project.
First you need to hand wind the elastic onto the bobbin, don't pull it, just hold it tightly and wind it.


The elastic thread should be wound tightly, but not stretched. In our case, three bobbins were enough to finish the top.
Place the bobbin in the hook as usual and tighten the thread.

Now you will need to try sewing a test material to determine which settings work best on your sewing machine. Generally, it is necessary to increase the stitch length.

You may need to lower the upper thread tension a little, but on some models it will need to be raised. So it’s better to read this in the instructions for your machine model or consult with the manufacturer.


On most machines, assembling the assemblies will go without problems, however, if you still have any difficulties, most often they are related to tension.

Information on each model of sewing machine would take up too much space, so the only thing we can advise you to do is Google it.

4. Fourth step - assembling assemblies


Place the fabric right side under the presser foot and start sewing close to the top edge. You can push the material back at the beginning and finish as usual.

Sew parallel to your first stitch, using the edge of the foot as a guide. We switched the needle to the far left position.

The first line has virtually no effect, but with each subsequent line you will see how well the fabric gathers.


Make sure your fabric is not warped and lies flat on your work surface, you will need to use two hands to keep the fabric flat as the gathers will lift it up.

The number of lines depends on the size of your breasts. Try the dress on several times to determine where the gathers should begin. But general recommendation maybe five to eight centimeters from your waist.

To make the top of the sundress look neater, you need to iron it with front side using par.

5. Fifth step - straps


The type, length and width of the straps is purely a matter of taste. You can wear this sundress without straps, but it looks great with straight or crossed straps at the back.

Try on your sundress wearing your favorite bra to determine the length of straps you need. Have someone help measure them and pin them in place where they need to be sewn.

We decided to make them two and a half centimeters wide. Next, you should cut off ten centimeters multiplied by the length of the straps. Fold the fabric in half and press the strap, then press the edges into the center. Sew on both sides, closer to the edge. Sew on the finished straps - your dress is ready.

Below are the patterns summer dresses different styles. They are so easy to sew that even a novice dressmaker can sew any of them.

For the very beginners

Let's start with the simplest.

This option is the easiest to sew. A simple summer dress pattern is given below.

Constructing a pattern

The main measurement is the circumference of the chest or hips. You need to choose highest value. In this description, the main measurement will be hip circumference.

You need to start building a pattern with a rectangle, the width (AB) of which = the circumference of the hips multiplied by 1.4 (the necessary increase for folds). For fuller ruffles, you can multiply by 1.6. Height (length) = 65 cm (or required length).

The height of the frill = 12 cm (without allowances), and the width = width AB.

Uncover

1 item - dress, quantity - 1 piece;

Part 2 - frill, quantity - 1 pc.

Seam allowances on the short sides of the dress and 1 long side. The frills should be 1.5 cm, and at the top of the frill and the bottom and top of the dress - 2.5 cm.

All that remains is to sew the dress, which will not be difficult even for novice seamstresses.

How to sew

Sew a vertical seam on the fabric of the dress. Process the cuts and iron. Fold the bottom of the dress, baste, then stitch. Fold the bottom edge of the frill and stitch. Place the frill along the top of the dress panel, baste, then sew as 1 piece. Fold in the seam allowances along the top edge of the frill and dress, baste and, leaving a small area open (for the elastic), sew. Insert the elastic, adjust its length and stitch the ends of the elastic. Sew up the open section of the drawstring. It is done!

A selection of patterns

Below are patterns for summer dresses and sundresses, which are also quite simple to sew.

Choose a dress for overweight women, in some cases, is a problem. So the question arises, where to find clothes of a non-standard size and how to choose them correctly. But there is an excellent way out of this situation: you just need to sew a dress that will not only fit perfectly on a curvaceous lady, but will also be distinguished by its individuality and uniqueness.

We will offer you the simplest patterns for summer dresses and sundresses that are easy to sew with your own hands. How to quickly create patterns for light dresses and sundresses? Our patterns will consist of rectangles.

The most important thing in these models is the choice of fabric. The fabric should be thin and flow well. Then even the simplest rectangle will look very impressive. Pick up bright colors for summer dresses and sundresses.

Pattern for a dress with elastic

This dress is perfect for the beach. Firstly, it is strapless and held on by an elastic band. There will be no white stripes on the shoulders from the straps. Secondly, this dress is very convenient for changing clothes on our beaches, which are not always equipped with cabins.

The pattern of this dress pleases with its simplicity. These are two rectangles. The dress takes on its shape after the elastic bands are sewn in. We sew elastic bands along the top of the dress and along the waistline.


Pattern for a sundress

Even those who have never done sewing can sew a sundress from rectangles with their own hands. We need two rectangles. The width and length of the rectangles will depend on what kind of sundress you want: fit or wide, short or long. The front and back of the sundress are the same.

We sew the side seams, leaving approximately 15 cm unstitched. We decorate the top of the front and back as drawstrings. We thread ribbons through the drawstrings and tie them at the shoulder.

Pattern for obese women

Patterns for light dresses or sundresses - rectangle. The length of the rectangle is 2-3 meters. It all depends on what kind of folds you want on the sundress. The width of the rectangle is your choice. It will depend on what kind of sundress you want: short or long.

In the center of the upper edge of the rectangle we make a 5-10 cm incision. This will be the depth of the neckline. We design the entire upper edge as a drawstring and thread two ribbons through it. The ends of the ribbons are sewn into the seam at the back, and go out into the slit at the front. The ribbons are tied at the back of the neck. You can use a ribbon to tie up your dress.

Such simple patterns will allow you to prepare for the beach season in half an hour.

Video lessons

Sundress patterns for summer:

Clothing styles for obese women:

How to sew a dress in 30 minutes:

Constructing a wrap dress pattern:

When working in an office, be sure to adhere to business style, as required by the corporate rules of many companies in order to maintain the company's image. Therefore, the pattern of sundresses for the office will be useful for craftswomen who sew clothes for themselves and to order. The simplest version of such a wardrobe item is a sheath dress, for sewing which a regular pattern of a fitted or straight silhouette is used.

The entire creation process can be divided into several main stages, after overcoming which you will create an excellent formal outfit.

Stage one: taking measurements

In order for the pattern of sundresses for the office to fit in size, you need to build it based on your own measurements. This is precisely the beauty of individual tailoring, because things that are sold on the market and in stores are sewn according to generally accepted standard volumes. And, as you know, they do not always coincide with real forms. That's why girls have to try on great amount dresses to choose the one that fits your figure perfectly.

So, to build a template you will need the following measurements:

  • girth of chest, waist, hips, neck;
  • back width;
  • breast dart solution;
  • shoulder width;
  • chest height;
  • length of the back and front to the waist.

Stage two: constructing a drawing of the workpiece

The pattern of a warm sundress for the office and the summer version are constructed identically, the only difference is the allowance for a loose fit. For a summer product, add 1 cm to the measurement, and for a warm product - 2 cm.

The drawing is developed on the basis of a quadrilateral with sides corresponding to 1/2 the volume of the chest + an increase in the length of the product. Horizontally in the drawing, you should immediately mark the height of the chest, waist, hips and draw lines that form an auxiliary grid.



At this stage, the main pattern of sundresses for the office is ready. It can already be used for sewing products from thick and thin fabrics.

Modeling and design

The workpiece can be modified by adding raised seams. To do this, the pattern of sundresses for the office is drawn out in accordance with the desired lines, and then cut into elements. This way you can define the boundaries for combining different colors fabric or just make seams and stitch them beautifully.

Stage three: cutting and assembly

How to cut for summer and for the office? The pattern should be constructed taking into account a loose fitting allowance, which is added not only along the chest line, but also along the hips and waist. Otherwise, the product will hinder movement. The only exception may be fabric with elastane or knitwear. Otherwise, cut as standard. An allowance is made along the contour of the parts to process the seams: along the hem - 4 cm, and along the seams - 1 cm. If the fabric is very loose, then the allowance can be increased.

To make the product easy to put on, it is better to make it with a zipper. To do this, you can use a tractor or secret lock 75 cm long. It should be inserted into the middle seam of the back, on which you can also make a cut for a comfortable step. You can also make it tapered at the bottom for the office. In this case, the patterns are narrowed along the side seam from the hip line to the hem by about 5 cm.

Stage four: decorative design

A completely simple-to-build blank in combination with a calm fabric will make the product strict, and in order to somewhat improve the image, it needs to be properly decorated. For example, embroider it at the neck with discreet stones to match the main fabric, or make a lace or contrasting collar. A thin belt at the waist would also look nice, for which you definitely need to make belt loops. This product can be worn with a thin mesh neckline or a plain tight knitted T-shirt.

The simpler the silhouette, the richer the material you can choose. And we are not talking about color at all, but about texture. The embossed weave of the fabric is an ideal option for a relaxed sundress. A product with embroidery along the field of the material will look original. Such a sundress will not need to be decorated and supplemented with vertical seams and trim. The simplest sundress pattern for the office is suitable here.

"Burda" is one of the sewing magazines that quite often uses similar techniques with a minimum amount of detail and maximum fabric saturation. It is precisely these wardrobe items that, as a rule, become the most beloved, because there is nothing superfluous in them.



@ 2024 nobelbar.ru - Shoes, clothes, style, accessories, manicure, hairstyles