Fashionable DIY knitted scarves. How to make a regular knitted scarf original

Many knitting lovers can safely confirm that knitting a scarf is very simple. Of course, if you knit a scarf with a regular elastic band, then it is really simple. But such products are no longer in fashion. Nowadays, when every person wants to be individual and different from others, craftswomen come up with new patterns and techniques for knitting scarves. They must be original and beautiful, and most importantly, made with your own hands. Therefore, in this article we decided to show you knitting patterns for fashionable scarves.

Fashionable scarf made from sectional yarn

Snood scarves are a fashionable youth accessory. It is worn regardless of weather conditions. This scarf can be knitted using either warm yarn or cotton yarn with the addition of other synthetic fibers. Many people like its versatility due to the fact that the snood can be worn not only around the neck, but also during cold weather, even thrown over the head. And still the neck will be protected from the wind.

It is very easy to knit such a specimen with your own hands. Prepare three skeins of wool and acrylic yarn, as well as knitting needles number 4.5 in the round. The work uses the “rice” pattern, its diagram will be shown in the article. Even a beginner can understand the technology. Knit the first row by alternating one person. p. and one p. p. The next row is almost the same, only knitting begins with 1 purl stitch. Then simply repeat the first and second row alternately.

Video: How to knit a snood with a “rice” pattern

Unusual transformable scarf

At first glance, you can tell that knitting such a scarf will be a bit difficult. Actually this is not true. It is knitted persons. and out. etc., and at the end they add a border crocheted. The originality of the scarf lies in the fact that it is made in the form of pleating with a drawstring cord that tightens the product.

The size of this fashionable and original accessory is 87 by 20 cm. For work, prepare knitting needles number 3.5, acrylic yarn, and for the border use acrylic threads with lurex. You will also need two laces 125 cm long; you can knit it yourself or purchase it at a factory-made store.

Cast on thirty-six stitches with knitting needles and knit six rows in this order: twelve faces. p., 12 p. in garter stitch technique and 12 knits. p. From the seventh to the twelfth p. it is necessary to change the knitting as follows: instead of faces. p. knit purl. p., and also instead of purl. n. knit faces. p. Starting from the twelfth row to the seventeenth, change the technique again until the work is completed. Tie the scarf to the length you need. Then pull the finished laces through the joints that formed between the 3 wide rows.

Original scarf with braids

Being unusual is easy if you can knit. But if you want to do it unusual thing- you can always learn.

We invite you to knit an original and at the same time incredible beautiful scarf with braids.

Important! Before starting knitting, try knitting a sample. If the pattern works out, you can move on to knitting a scarf.

For knitting you will need:

threads gray 550 gr.;
knitting needles No. 4;
needle for sewing on buttons and the buttons themselves, 2 pcs with a diameter of 4 cm.

We will knit the scarf in garter stitch, all rows are knit stitches.

Scarf knitting process:

We dial 59;
Knit 7 rows (garter stitch);
Knit row 8: 5 stitches. knits., next 22 stitches. - close off, 5 stitches. knits., next 22 stitches. - close off, 5 stitches. persons;
Knit row 9: 5 stitches. persons and instead of closed 22 pet. we need to cast on 22 stitches, knit 5 again. and cast on 22 stitches, and again, knit 5;
10-15 row all facial loops according to the main pattern;
Repeat row 8-15 until the end of knitting until the scarf is the desired length.

Scheme for assembling a scarf with braids:

We twist braids according to the video lesson.

All that remains is to decorate the scarf with buttons and our “original scarf” is ready!

Original scarf "Cat"

This original and beautiful scarf can be worn not only by adults, but also, of course, by children. You need to prepare yarn from three colors and knitting needles number 3 for knitting. First of all, we knit the body. You need to cast on ninety-six stitches from gray yarn in 2 folds and knit fourteen centimeters of faces. iron. Then knit strips alternating white and gray. Namely four rubles. knit in white and six rows in grey. After 69 cm, close all links.

Then there are the cat's paws. You need to cast on forty stitches with gray yarn and knit faces. stitch with decreases in every 2nd row. When you have only twenty links left, start making strips using the same technology as described above: 4 p. white and 6 rub. grey. After twenty centimeters, switch to knitting with light yarn and decrease every 2nd row. The other paw is knitted in exactly the same way.

The tail is made of gray thread. You should dial on sixteen stitches and knit again. satin stitch with alternating stripes: six r. gray and four r. white. After twenty-five centimeters, insert a light thread into the work and make decreases every 2 r.

The cat's face is knitted in gray. Cast on three stitches and continue knitting the face scarf. stitch, making increases in every 2 r. one p. on both sides. When you have thirty links, knit the fabric exactly without increasing four cm. After that, make decreases again in every 2 r. 1 p on both sides. After 18 cm, the buttonholes can be closed. The second similar element is knitted by analogy.

Assembling a fashionable scarf will be next. You need to sew the paws with a tail. With your own hands, make claws on your paws using white thread. Then we sew the body, sew a tail with legs into it. Then comes the muzzle, in which the eyes, nose and antennae are made gray, and the pupils are embroidered with white thread. This completes the original knitting.

Video: Koto scarf knitted

Original knitting patterns

A scarf is a mandatory and integral part of every women's wardrobe. This, at first glance, inconspicuous accessory, often plays an important role in completing any image. With the help of a scarf you can complement or emphasize the personal taste of its owner. If you want to knit an original and fashionable scarf, then this article is just for you. In it you will find beautiful ideas knitting scarves.

Types of scarves

No matter what they say, a scarf primarily serves as protection from bad weather. And only then it plays the role of an independent accessory that can complement different style. The most common scarves include the following types: scarf-collar, bactus and shawls.

The scarf-collar model is common among young people. The secret of its popularity is that it can be worn not only around the neck, but also used as a hood. Varied and original circuits for knitting such scarves can be found on the Internet in a huge number, as well as on our website. Baktus are fashionable scarves that resemble knitted scarves in appearance. They are worn over clothing that exposes the neckline. On cool evenings, it will perfectly protect you from colds, and will also become a color addition to your shoes or handbag. DIY knitted shawls have a light and soft structure, but at the same time have good thermoregulation. They are worn both under clothes and covered with them top part coat or raincoat.

In any case, to create your own original scarf, you need to have patience, a little inspiration, and also a little imagination. And then you will definitely knit a unique accessory that no one else will have.

Multifunctional scarf snood

This model of the original scarf is knitted with straight fabric. The first part of it is done using the garter method, and the second part is knitted in small squares consisting of faces. and out. loop. To complete the work, the product is connected in a circle, and then the upper and lower parts are crocheted. For added piquancy, the scarf can be decorated with hand-made flowers.

To knit such a fashionable scarf, you will need thick yarn and knitting needles number 4 and 4.5. Cast on sixty stitches and knit according to this pattern: the edge goes first, then thirty garter stitch stitches. In the front and back rows it is necessary to knit the front loops with knitting needles. This pattern is made according to the scheme that will be demonstrated in the article. Then, from twenty-eight loops, you knit the second ornament, which will also be shown in the diagram. Knit the scarf this way until it reaches your shoulder level. When the required length is reached, close the loops and connect the product into a circle. Don't forget to crochet the top and bottom.

The second example of an original scarf is somewhat similar to the previous one. Knitting is done from top to bottom. It is better to use circular knitting needles. In this case, you do not have to connect the product at the end. Having calculated the required number of loops for the top, knit the scarf with the pattern that you make best, there are no restrictions. And then start making increases through 1 loop. The length of the scarf is also calculated independently. At the end, the original scarf is framed with a crochet according to the following pattern: two stripes of columns with two throws of thread, and then an ornament.

As you can already see, knitting a fashionable scarf is very simple. Look at the photo to see what a beautiful accessory you should get.

Scarf chain

This scarf is so original that it will not leave you without the attention of others. At first glance it may seem that it is very difficult to tie, but this is not at all the case. On the contrary, it is even very simple. Prepare 700 g of yarn for work, which should consist of wool, nylon and polyester. You will need several colors of thread. Colors used for this scarf include olive, orange, purple and blue. You also need stocking needles number 10. The knitting density will be 7 sts by 12 r. = 6 cm by 10 cm.

Cast on seven stitches using knitting needles and knit in circular rows. Four centimeters from the beginning, close all the loops. Tie rolls of olive, orange, purple and blue color. Then you need to weave the scarf according to the pattern that will be proposed in the article, alternating every two and nine centimeters. At the very end, two large tassels are made from all colors of yarn and attached to the edges of the product.

IN this season Scarves that are knitted in laconic and calm forms are very popular. The threads are used in pastel colors and the patterns are made simple circuits. Every needlewoman or novice craftswoman should knit a unique and original accessory for all occasions and for every type of style.

Video: How to knit a bactus scarf

A scarf is a fairly simple product for those who want to learn how to knit. The simplicity of knitting this accessory helps to consolidate useful skills needed in the future.

Why start with knitting a scarf?

The thing is that knitting a scarf does not require using a pattern. In addition, a product of this type does not require stitching after completion of the work. Observe a certain sequence actions, do not skip the loops and then in the end you will get exactly the scarf model that you liked initially.

The optimal width of the scarf is from ten to forty centimeters. But the length may vary. It all depends on individual preferences. Perhaps you would like to knit an original scarf, two meters long. The choice is yours. But remember that the length of the scarf will affect the number of loops needed. If the scarf is narrow, then twenty loops will be enough. If the product is wide, then you will need at least fifty loops. Their exact number also depends on the thickness of the thread - the thicker it is, the fewer loops should be cast on with knitting needles.

Which yarn is better

There is no clear definition on this matter. But, if you are planning to knit an original scarf for a child, then you should give preference to soft threads. They will not irritate the baby's skin, causing him discomfort. Pay attention to the yarn packaging. As a rule, the recommended type of knitting needles is indicated on it. An unusual rule applies here - take more knitting needles than indicated on the package, then the product will turn out more elastic.

We knit not a simple, but an original scarf

Simple knitting is easy to learn. I want to knit an unusual scarf! In this case, simple but very effective options for decorative elements will come in handy:

Twisted fringe;

Volumetric patterns;

Spiral tapes.

Knitting ruffles with knitting needles

Knitted ruffles give any knitted item a special volume, femininity and even romance. Using ruffles, it costs nothing to knit original-looking gloves, make sleeve cuffs, jacket collars and sweaters elegant.

In the process of knitting simple ruffles, the number of loops from the beginning of the fabric to the edge increases two or even three times. The coefficient depends on how lush and massive the ruffles need to be knitted. Thus, ordinary ruffles with a double number of loops require casting on a number of loops that is a multiple of two. Having finished knitting ruffles required height using the stockinette stitch technique, you should reduce the total number of previous stitches by half. To do this, knit on front side knit all stitches in pairs. Then you can switch to knitting with the usual pattern of the main fabric. Follow the same sequence of actions if you want to knit more voluminous ruffles. In the second option, on the front side, knit three loops together with the front one. Then continue knitting the main pattern.

Fringe is the most popular scarf finishing option.

Perhaps, large fringe using the twisting technique is one of the favorite options for decorating knitted items. This finishing element looks neat and does not crumble.

The fringe is made with knitting needles by twisting the loops while knitting the front row using the stocking stitch technique. The loop following the edge stitch is knitted. Remember that you cannot reset the loop. Then use your index finger to hook the loop on the side of the right knitting needle and pull it out to five to seven centimeters. For convenience, you can hold the working thread with the fingers of your left hand. Using rotational movements, twist the previously drawn loop clockwise. You need to make enough turns to end up with a tight loop around your finger. Remember the exact number of revolutions and try not to change it. This will determine how neat and uniform the fringe will be.

Now carefully remove the long loop and bend it in half. In this case, the loop should be removed from index finger and move to a free knitting needle. Do not let go of the tight loop twisted in the center, turning the folded loop in half by the very tip only counterclockwise. After this, all that remains is to knit the loop that was removed and the loop that remained on the left knitting needle at the very beginning. We knit the last two loops in each row in pairs. This way the fringe will be securely fastened. Knitting the purl row is done with simple purl stitches.

Volumetric patterns on scarves for original natures

Such elements knitted are simple but in an unusual way decoration of the main fabric of the scarf. The effect of volumetric relief is achieved by adding and decreasing loops, as well as knitting additional rows in some areas.

Spiral ribbons are appropriate everywhere

Knitted In skillful hands, a spiral ribbon can turn into any decoration. A flower, a shuttlecock - these are not all options, you just need to use a little imagination. This type of decoration is knitted in regular garter stitch, but in shortened rows.

Tying a spiral ribbon is easy. Cast on fifteen stitches and knit them in two rows with knit stitches. Once completed, begin knitting the third row with shortened stitches. Wrap the working thread around the penultimate stitch, turn the knitting to a purl row and continue working with knit stitches. Thus, the fifth row will consist of twelve loops. That is, every two rows we decrease one loop until there are two left. The first wedge is ready. In the same way, we complete the work on the spiral of eight wedges. They should all form a circle.

The resulting spiral ribbon is a ready-made and unusual decorative element for a hat, scarf, gloves and other items of clothing.

He who seeks will find

The above decorative elements will give your scarf originality and romance. The main thing is not to be afraid to try and experiment with patterns and techniques. After all, knitting is special kind art. And if the desire to start working has faded over time, then it’s worth looking interesting schemes for knitting on our website. When you find that very model, then all fears of failure will go away by themselves.