Sew a dress from warm knitwear. DIY knitted dress: detailed master class with photos

If the knitted fabric is thin, stretchy, you will need special sets of needles (No. 75), and thin polyester threads (for example, 40\2400). Such careful selection of needles is due to their characteristics. Their tip is slightly rounded to pass freely between the fibers of the knitwear without damaging them. The selection of needles for an overlocker will be similar to the selection for a machine, also with rounded points.

Before sewing a knitted dress, always make a test seam on a small piece of fabric (you can use scraps from the pattern). This is necessary to check the quality of the seam:

there should be no holes - marks from the passage of the needle;
Skipped stitches are not allowed. The most suitable seam used for stitching the main parts may be one of the following:
narrow zigzag (length of one stitch 3 mm, width - up to 1 mm);
overlock, with the addition of a regular machine straight stitch (at a distance of 3 mm between seams).

When stitching, you need to lightly stretch the fabric itself (not the seam allowances). To hem the edges of the product (hem, sleeves), you can use a special machine or use a double type of seam. To process the neckline, especially for thin knitwear, a roll cut in a strip diagonally from the same fabric is useful.

Any DIY knitted dress requires careful ironing of the seams after stitching. To do this, you can gather the seam a little, and then a short time Press down on top with an iron. Move the iron in different sides Not recommended as it may stretch sensitive knitwear too much.

Knitwear dress patterns

Before you start working with patterns, you will need to carry out preliminary preparation. For this you will need:

sewing machine (hand or foot driven);
overlocker (you can use the built-in seam processing function in a regular sewing machine);
table with large area surfaces (for cutting);
various sets of needles (special knitted ones for machine and for hand sewing);
scissors;
flexible centimeter;
tailor's chalk;
needles-pins (for attaching the pattern);
meter ruler;
iron and ironing board.

To make a knitted dress with your own hands, even without experience, will only take a few hours. There are no darts in this model. Proper selection of the type of fabric, length of the product and adjustment of its fit can make even a knitted dress for plus-size women elegant.

You can easily cut such a dress directly on the fabric, without a pattern.

The sewing sequence will be like this:

Stitched shoulder and side seams.
Processing the bottom of the sleeves and seams.
Marking the sleeves along the edge of the shoulder (make sure they fit correctly) and processing the cuts.
Ironing the seam allowances (on both shoulders).
Neck treatment.
Hem folding and stitching.

This dress will be not only light, but also a fairly quick example of how you can update your wardrobe yourself. To complement this model, you can make a wide belt from fabric, leather, suede and other types of materials, or use a ready-made accessory.

Preparation

Determine your size using the Burda chart;
Cut out the pattern pieces according to the contours of your size;
Transfer the paper pattern details onto the fabric and cut out;
Baste the details of the dress or pin them together with tailor's pins;
Set your sewing machine to a stretch stitch;
Swap your regular needle for a knit needle (strech, Superstretch, or jersey).

Sewing

Sew the back parts;
Sew the details of the left front part;
On the left front panel and on the right side of the front, baste the seam allowance along the bottom edge to the wrong side and stitch it to the edge;
Sew shoulder seams;
Gather up right side front: set the maximum stitch length and lay two parallel straight lines along the side edge from mark to mark at a distance of 5 mm from each other. Pull the cut to 14 cm, distributing the gather evenly;
Sew the side seams;
We make an allowance for the hem at the bottom of the back.

Processing the back and front neckline

Baste the facings of the front neck with the facings of the back neck and stitch;
Baste the facing to the neckline, aligning the shoulder seams, and stitch.
Cut the seam allowances close to the stitching and notch in the rounded areas;
Turn the facing up;
Press the seam allowances onto the facing and stitch close to the seam;
Turn the facing to the wrong side, iron it and sew it to the shoulder seams.

Alternative neck treatment

Knitwear is a very plastic and pliable fabric. If you still find it difficult to process the neck by turning, this can be done in another way.

Place a stitch along the back and front neckline, departing 1-2 mm from the seam allowance line. This will prevent the cut from stretching;
Turn the seam allowance to the wrong side, baste and topstitch.

Treat the armholes in the same way as the neckline of the front and back of the dress.

Grind all the parts in the sequence indicated in the instructions.

Processing slices

Overcast all open sections of the dress with a zigzag stitch or a stitch that imitates an overlock stitch; many modern sewing machines have it. And also, you can use.
If you have a serger, overcast all open edges on it. In addition, our dress, like any other knitwear product, can be completely sewn using an overlocker. Using a sewing machine, all you have to do is hem it.
If the sections of knitted fabric do not fray, as in our case, then they can be left untreated.

Using the same method, you can sew a dress with sleeves.

You can purchase a set with a pattern for this dress and absolutely all consumables at ours with a 30% discount. Besides, every 10th buyer will receive a 500 rubles discount on electronic patterns.

Follow the attached instructions exactly to avoid possible errors when cutting parts and sewing. In addition, if you have any questions while working, you can ask them on the forum on our website.

Sew with pleasure!

Photo: website
The master class was prepared by Yulia Dekanova

The most beautiful dresses for pregnant women and the most simple ways sew them.

It has been noticed that the eyes of a woman expecting a child glow with a special light of hope, peace and happiness. And all pregnant women are beautiful. Nevertheless, during this sometimes difficult, but unique period, women want to dress stylishly, fashionably and simply beautifully.

For those who know how to sew, there are a lot of master classes on sewing dresses for pregnant women. So in our article you can find patterns and lessons for sewing dresses of the simplest everyday and evening styles.

How to sew a summer cotton dress for pregnant women: pattern, step-by-step instructions

A summer chintz dress is quite easy to sew. Some models have only five or six straight seams, and the only additional details are pockets. There are also ways to sew a maternity dress without a pattern.

VIDEO: How to sew a maternity dress without a pattern?

If your pregnancy is long, make the waist higher and the ruffles of this dress more voluminous.

There are also more complex models, with frills, folds and a large number of seams. For beginners, the dress pattern presented below is suitable. Summer dress The yoke is gathered at the chest and full at the waist. This dress is not hot in summer. The pattern is quite simple and the most complex element there will be a flirt. On the chest and hem of the dress, the pattern consists of rectangles.

Step one: make a yoke pattern.

We make a yoke pattern from paper and cut it out of the fabric, adding seam allowances. To avoid mistakes, attach the paper pattern to a blouse that fits you well. Your side seams should match.

Step two: cut out two rectangles.

One rectangle will be on the chest and back, and the second will be the hem of the dress. To avoid mistakes, measure the circumference of your chest with a centimeter, add 5-7 centimeters to the side seams, plus a seam allowance. The length and width of the hem of the dress can be arbitrary.

The fabric is ready to cut and all that remains is to sew the dress. So that you do not have to process the edges of the yoke, make it two-layer.

Cut out 2 pieces for the front and back of the yoke. There will be 4 of them in total.
Now sew two pieces together, facing inward. Leave the bottom unsewn and turn it inside out.
Place a finishing stitch along the edge. The coquette is ready.
Gather the rectangle that will be on the chest with small folds and sew the yoke to it. Now all that remains is to sew and tuck the hem of the dress.

To make the dress easy to put on under the bust, it can be gathered with an elastic band. If desired, it can be additionally decorated with embroidery, stripes, lace, beads or something else.

How to sew a warm winter dress from knitwear for pregnant women: pattern, description

The simpler the dress pattern, the more interesting the result. Maternity dress with sleeve bat can be sewn from thick knitwear. If such a dress is just above the knees, then it turns into a comfortable tunic. If the length of the dress is below the knees, then it can be worn with stockings and shoes. The sleeves of such a dress can be cuffed or without cuffs at all. If the sleeves of such a dress are made just below the elbow, then in winter you can wear a thin sweater under it.

Measure the circumference of your chest, add 10 cm to the front and back for a loose fit and cut out the dress. Since the dress is made of stretchable fabric, it will fit your figure comfortably. If you bought expensive knitwear and don’t want to take risks, then sew a dress using a pattern from cheap or unnecessary fabric, for example from an old sheet. Try on and adjust the width of the dress to decrease or increase.

How to sew the most beautiful wedding dress for a pregnant woman?

The ideal option for a pregnant woman is not to run around the shops exhausting herself with fittings, but to sew Wedding Dress on one's own. What are the advantages of such a solution?

You don't have to tire yourself out shopping.
You save money that can be spent on the baby.
Your dress will fit your figure perfectly.
You will choose a dress style that will hide your pregnancy and will not harm your unborn child.

And you can start sewing a wedding dress by choosing the style and material from which it will be sewn.

What are the advantages of this dress model?

A full skirt will visually reduce your waist.
The soft corset and elastic, soft lacing allow you to move and sit freely.
A voluminous bra that can be worn under a dress will visually reduce your waist size.

Advice for those who want to sew their own wedding dress: make your own personal mannequin. This will save you from tedious dress fittings and make your work much easier. You can make a mannequin from tape with your own hands in half an hour.

To prevent such a mannequin from bending, it can be stuffed with unnecessary crumpled newspapers or padding polyester. If you have decided on the style of the dress, you can start cutting out the corset.

How to make patterns for your figure?

Take cheap fabric and design a pattern directly on a mannequin. Here's how to do it.

VIDEO: How to make a simple dress pattern?

Sew a corset from cheap fabric, put it on and make sure it fits well on your figure. Cut out the expensive wedding fabric using the resulting patterns and sew a corset for the wedding dress.

Don’t forget that during the preparation for the wedding your volume will increase! This means you will need to make the waist of the dress a few centimeters larger than it is now.

The lacing for such a dress can be made not from rigid cords, but from a white round hat elastic band. It is quite dense and at the same time stretches easily. This way you can tighten your waist without harming your baby. A fluffy skirt will work if you gather the fabric into a small or large fold. To add volume, you can wear a wedding dress petticoat under this skirt. But, the choice of wedding dress model is yours.

Pattern and style of a-line, flared maternity dress: photo

The A-line dress is suitable for pregnant women due to its loose fit. This dress is ideal for women with a short pregnancy. This dress can also be sewn without a pattern.

Dresses are cut directly onto the fabric. Without using complex patterns and patterns.

VIDEO: How to sew an a-line dress for pregnant women?

Pattern and style of maternity dress with a yoke: photo

It’s quite easy to sew a maternity dress with a yoke if you have a T-shirt or blouse that you don’t mind throwing away. Cut off the sleeves, back and front at the seams. Cut the yoke along the shelf, and cut the lower part as shown in the picture.

Do the same on the back. Lay the cut bottom of the T-shirt on paper and trace along the side points with a pencil. The dress pattern with a yoke is ready. Don't forget to add 2 cm for seam allowances and, if desired, 2 cm for loose fitting if you are sewing a dress from fabric that does not stretch. In stores you can find fabric that is folded. If you sew it to the yoke by collecting the folds, you will get a wonderful maternity dress with a yoke.

Pattern and style of high-waisted maternity dress: photo

To create a high-waist dress pattern, you will have to make a pattern for the front and back of the dress and cut it below the bust line.

The hem of the dress under the bust can be a rectangular piece of fabric gathered into a fold.

What if you don't want to make complicated patterns but want a new high-waisted dress?

Take any new or old blouse you own, cut it below the bust line and sew on a hem using contrasting fabric or fabric that matches the dress.

How to sew the most beautiful and elegant dress for a pregnant woman?

A beautiful dress first of all comes from a beautiful fabric High Quality. And if this is a dress for a pregnant woman, then preference should be given to natural fabrics. If you have already purchased the fabric, then all you have to do is choose the style of your dress. It could be:

High waist
On the yoke
A-line dress
Loose bag dress

Dresses made of fabric with a border can be very interesting. A bright, floral pattern will emphasize the joyful expectations of the expectant mother.

Dresses with frills take the emphasis off rounded shapes and allow a woman to feel comfortable in such an outfit.

How to sew the most beautiful evening dress for a pregnant woman?

Beautiful knitted, silk and light chiffon fabrics are suitable for an evening dress. Draw a picture of yourself and your outfit in your imagination. Decide on the style of the dress, make a simple pattern and sew your unique dress. It can be simply gorgeous.

VIDEO: How to make an elegant dress with lowered sleeves?

Or maybe simpler, not restricting movement.

The most beautiful dresses for pregnant women: photos

Knitted dresses are very comfortable to wear. They are soft, the fabric stretches well, which means the woman will feel comfortable.

High-waisted floral dresses will create a good mood.

A summer dress can be made from the brightest fabrics. Or you can choose a more modest fabric. It all depends on your mood.

Models of wedding and evening dresses for pregnant women: photos

Wedding dresses with a belt or bow above the waist look very feminine and cute.

Elegant dress made of heavy silk or knitwear can be to the floor. But, if a woman is afraid of getting confused in such a dress, it can be shortened in an original way in the front.

A bag dress made of heavy fabric also looks very original, and for those who love airy lace dresses, they can be sewn from light, light lace fabrics.